DAFTAR PESAN ERROR LCD DAN TROUBLESHOOTING FARGO HDP 5000 (Bagian 4)

No	LCD ERROR MESSAGE	Cause	Solution
31	Head Sensor Error (PC Error Message No. 8)	The Printhead Temperature Sensor is not functioning or is not connected properly. OR The Printhead is not cooling properly.	If the problem persists, call for technical assistance
32	Head Voltage Err (PC Error Message Nos. 103 and 105)	A hardware fault has prevented setting the correct Printhead voltage	Reset the Printer and try again. If this problem persists, call for technical assistance
33	Headlift Error (PC Error Message Nos. 102, 103, 104, and 105)	This is a problem with the Printhead Lift or Transfer Roller Headlift	Reset the Printer and try again. If this problem persists, call for technical assistance.
34	Heater Error (PC Error Message No. 161)	The Transfer Heater Roller is too hot.	Reset the Printer and try again. If this problem persists, call for technical assistance
35	Invalid Film (PC Error Message Nos. 94, 95, 96, 164, 165, and 166)	An unauthorized film is installed in the Printer	Get the correct Film from your dealer.
36	Invalid Password (PC Error Message No. 136)	Printing disabled at this time	Press Cancel to abort this print job and then check security settings at host computer
37	Invalid Ribbon (PC Error Message No. 93)	The print data sent to the Printer is corrupt or has been interrupted.	Reset the Printer and try again. If this problem persists, call for technical assistance
38	Lam 1 Tag Err (PC Error Message No. 259)	A RFID read or write error occurred on Cartridge 1.	Retry, and if it fails again the material cannot be used.
39	Lam 2 Tag Err (PC Error Message No. 260)	A RFID read or write error occurred on Cartridge 2.	Retry, and if it fails again the material cannot be used
40	Lam Async Error (PC Error Message No. 245)	The Printer timed out waiting for communication from the Laminator.	Check Lam power/connections and restart the Printer