DAFTAR PESAN ERROR LCD DAN TROUBLESHOOTING FARGO HDP 5000 (Bagian 10)

No	LCD ERROR MESSAGE	Cause	Solution
91	System Fault (PC Error Message No. 164)	Unspecified system error is detected by the Printer Firmware	Reset the Printer and try again. If this problem persists, call for technical assistance
92	Unable to Feed (PC Error Message Nos. 14 and 81)	The Printer is unable to feed a card from the Card Cartridge	Verify there are cards in the Card Cartridge. Verify cards are not stuck together or jammed, and they are the correct thickness
93	Utility Error (PC Error Message Nos. 129)	Command resulted in an Error	See Resolving the Communication Errors.
94	Waiting for Data (PC Error Message No. 147)	The Printer has stopped receiving data from the PC	Reset the Printer and try again. If this problem persists, call for technical assistance
95	Wrong Film (PC Error Message Nos. 162 and 163)	The print film installed in the Printer does not match the film type selected in the Printer Driver. OR A Self-test job cannot be printed with the print media installed.	Replace film in Printer with type specified in the Driver. A reboot is required
96	Wrong Ribbon (PC Error Message No. 93)	The print Ribbon installed in the Printer does not match the Ribbon type selected in the Printer Driver. OR A Self-test job cannot be printed with the print media installed.	Replace Ribbon in Printer with type specified in the Driver
97	General Error	A general Printer error has occurred	Press Cancel on the printer or click on Cancel Print
98	Card Not Found	The Printer is unable to find the card	Please check Printer for a card or other obstruction, remove the card and cancel the print by pressing the Cancel Print button from the Driver’s display dialog or the Cancel button, located on the Printer
99	Cover is Open	The Printer cannot start printing because the Cover is open	Close the Cover to continue printing
100	Unable to Feed	The Printer is unable to feed a card from the Card Cartridge	Ensure that cards are available and loaded correctly, press the Resume button located on the Printer's LCD display to continue printing. To cancel the print, press the Cancel Print button from the Driver's display dialog and the Cancel button located on the Printer's LCD display