DAFTAR PESAN ERROR LCD DAN TROUBLESHOOTING FARGO HDP 5000 (Bagian 5)

No	LCD ERROR MESSAGE	Cause	Solution
41	Lam Card Jam (PC Error Message No. 53, 212, 214, and 215)	A jam occurred somewhere between the Printer and the Laminator.	Open covers and clear the obstruction/jam.
42	Lam Check Card (PC Error Message No. 213)	A jam occurred inside the Laminator	Open Lam cover and clear the obstruction
43	Lam Com Error (PC Error Message No. 246)	There was a communication failure between the Printer and Laminator.	Check Lam power/connections and restart the Printer
44	Lam Error (PC Error Message Nos. 237 and 238)52	A generic unknown error as occurred.	Reset the Printer and try again. If this problem persists, call for technical assistance
45	Lam Card Not Ejected (PC Error Message No. 216)	The card is not ejected from the Laminator	The Lamination material is stuck to the card.
46	Lam Handler Startup Error (PC Error Message No. 66)	A problem was detected during Printer start-up.	Reset the Printer and try again. If this problem persists, call for technical assistance.
47	Lam Handler Startup Error (PC Error Message No. 141)	After powering up the Printer, the Laminator was detected, but an error occurred which would prevent its use.	Check Laminator power and connections and restart the Printer
48	Lam Internal Error (PC Error Message No. 48)	A generic unknown error as occurred in the Laminator	Check Laminator power and connections and restart the Printer.
49	Lam No Film (PC Error Message No. 157)	There is no material loaded in the Laminator	Load Laminator material
50	Lam Timeout (PC Error Message No. 247)	The Printer timed out while processing information related to the Laminator	Check Lam power/connections and restart the Printer